251

Re: phpMyAdmin - Ошибка

если все верно изменили в путях должно все работать.

252

Re: phpMyAdmin - Ошибка

Но вот не работает не пойму почему

253 (изменено: DmitryV, 2010-11-23 22:00:35)

Re: phpMyAdmin - Ошибка

Если сыпался винт то возможно повреждены системные файлы, также проверить необходимо все пути в системе.
Пишите в скайп попробую разобраться, скайп указан на моем сайте

254

Re: phpMyAdmin - Ошибка

добрый день,

если при просмотре phpinfo()

в поле Loaded Configuration File пишет (none)
в поле extension_dir пишет C:\php5, а у меня архив был распакован в C:\php

Это ошибки?

255

Re: phpMyAdmin - Ошибка

Dmitri сказал:

в поле Loaded Configuration File пишет (none)

Это плохо. В httpd.conf должна быть строка, которая указывает каталог конфигурационного файла PHP:
PHPIniDir "C:/php"

Поправьте сперва PHPIniDir и этого должно быть достаточно для исправления extension_dir, если данная директива прописана в php.ini. Сейчас php.ini не загружается и не читается, соответственно.

256 (изменено: Dmitri, 2010-11-30 21:16:39)

Re: phpMyAdmin - Ошибка

вот содержание httpd.conf : 

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module "C:/php/php5apache2_2.dll"
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
PHPIniDir "C:/php"
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin ldima0000@inbox.ru

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/apache"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
   Options Includes Indexes FollowSymLinks
   AllowOverride All
   Allow from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
#<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # [url]http://httpd.apache.org/docs/2.2/mod/core.html#options[/url]
    # for more information.
    #
    #Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    #AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    #Order allow,deny
    #Allow from all

#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm index.shtml index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "C:/apache/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "C:/apache/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    Alias /pma "C:/apache/localhost/www/phpmyadmin"
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

257

Re: phpMyAdmin - Ошибка

Вы вложили директиву внутрь тега, который выполняется только на НЕ Windows (!mpm_winnt_module). Выньте директиву из тега и все будет в порядке.

<IfModule !mpm_winnt_module>
PHPIniDir "C:/php"

258

Re: phpMyAdmin - Ошибка

Спасибо большое...заработало

259

Re: phpMyAdmin - Ошибка

Еще вопрос небольшой:

После создания базы данных "phpmyadmin" как указано в инструкции, на главной странице внизу появилась надпись - "Дополнительные возможности для работы со связанными таблицами недоступны. Для определения причины нажмите здесь." и после перехода по ссылке пишет следующее:

localhost
$cfg['Servers'][$i]['pmadb'] ...    OK
$cfg['Servers'][$i]['relation'] ...    Не готово [ Документация ]
Основные возможности связей: Недоступно

$cfg['Servers'][$i]['table_info'] ...    Не готово [ Документация ]
Показать возможности: Недоступно

$cfg['Servers'][$i]['table_coords'] ...    Не готово [ Документация ]
$cfg['Servers'][$i]['pdf_pages'] ...    Не готово [ Документация ]
Создание PDF-схемы: Недоступно

$cfg['Servers'][$i]['column_info'] ...    Не готово [ Документация ]
Отображать комментарии столбцов: Недоступно
Преобразование: Недоступно

$cfg['Servers'][$i]['bookmarktable'] ...    Не готово [ Документация ]
Созданные закладки: Недоступно

$cfg['Servers'][$i]['history'] ...    Не готово [ Документация ]
История SQL-запросов: Недоступно

$cfg['Servers'][$i]['designer_coords'] ...    Не готово [ Документация ]
Дизайнер: Недоступно

$cfg['Servers'][$i]['tracking'] ...    Не готово [ Документация ]
Слежение: Недоступно

Что это означает, подскажите, пожалуйста

260

Re: phpMyAdmin - Ошибка

Dmitri сказал:

Что это означает, подскажите, пожалуйста

В дистрибутиве phpMyadmin есть файл /scripts/create_tables.sql - его надо импортировать в базу данных phpmyadmin.

261 (изменено: djbald, 2011-05-21 21:19:37)

Re: phpMyAdmin - Ошибка

Добрый вечер! У меня возникла проблема с phpMyAdmin. Делал всё по этим инструкциям http://php-myadmin.ru/learning/instrument-intro.html когда я захожу в http://localhost/pma то мне выкидывает вот это - ошибка.

И так же сама при http://localhost/phpmyadmin/

а при запуске программы Apaсhe нажимаю Start - появляется надпись error/

262

Re: phpMyAdmin - Ошибка

djbald сказал:

при запуске программы Apaсhe нажимаю Start - появляется надпись error/

Если Apache не запускается, то смотрите ошибки в файле C:/apache/error.log

Покажите последние записи из этого файла.

263 (изменено: djbald, 2011-05-22 02:27:53)

Re: phpMyAdmin - Ошибка

Вот мой файл...Error

Starting the Apache2.2 service
The Apache2.2 service is running.
rmine the server's fully qualified domain name, using 77.220.135.253 for ServerName
[Sun May 22 03:12:41 2011] [notice] Apache/2.2.18 (Win32) configured -- resuming normal operations
[Sun May 22 03:12:41 2011] [notice] Server built: May 11 2011 15:46:54
[Sun May 22 03:12:41 2011] [notice] Parent: Created child process 1668
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 77.220.135.253 for ServerName
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 77.220.135.253 for ServerName
[Sun May 22 03:12:42 2011] [notice] Child 1668: Child process is running
[Sun May 22 03:12:42 2011] [notice] Child 1668: Acquired the start mutex.
[Sun May 22 03:12:42 2011] [notice] Child 1668: Starting 64 worker threads.
[Sun May 22 03:12:42 2011] [notice] Child 1668: Starting thread to listen on port 80.
[Sun May 22 03:17:34 2011] [error] [client 127.0.0.1] File does not exist: C:/Program Files/Apache Software Foundation/Apache2.2/htdocs/announce
[Sun May 22 03:25:22 2011] [notice] Parent: Received restart signal -- Restarting the server.
[Sun May 22 03:25:22 2011] [notice] Child 1668: Exit event signaled. Child process is ending.
httpd.exe: Syntax error on line 129 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/php/php5apache2_2.dll into server: \xcd\xe5 \xed\xe0\xe9\xe4\xe5\xed \xf3\xea\xe0\xe7\xe0\xed\xed\xfb\xe9 \xec\xee\xe4\xf3\xeb\xfc. 
[Sun May 22 03:25:22 2011] [warn] (OS 995)Операция ввода/вывода была прервана из-за завершения потока команд или по запросу приложения.  : winnt_accept: Asynchronous AcceptEx failed.
[Sun May 22 03:25:23 2011] [notice] Child 1668: Released the start mutex
[Sun May 22 03:25:24 2011] [notice] Child 1668: All worker threads have exited.
[Sun May 22 03:25:24 2011] [notice] Child 1668: Child process is exiting

264

Re: phpMyAdmin - Ошибка

djbald сказал:

httpd.exe: Syntax error on line 129 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/php/php5apache2_2.dll into server:

Это причина ошибки. Теперь обратите внимание на установленные дистрибутивы. Если Apache скачали отсюда http://httpd.apache.org/download.cgi , то он собран под VC6, значит PHP тоже должен быть собран под VC6.

Необходимый дистрибутив PHP находится здесь. http://narod.ru/disk/7808137001/php-5.3 … 6.zip.html

265

Re: phpMyAdmin - Ошибка

Да, я скачал по этой ссылке, что вы указали. Сейчас буду пробывать и менять всё.

266 (изменено: djbald, 2011-05-22 21:37:09)

Re: phpMyAdmin - Ошибка

Я взял заново всё переписал и установил другой файл. Выдает ту же ошибку, что и была. Я не знаю в чём дело и что может быть.

Вот ещё раз посмотрите файл Error.

Starting the Apache2.2 service
The Apache2.2 service is running.
rmine the server's fully qualified domain name, using 77.220.135.253 for ServerName
[Sun May 22 22:10:09 2011] [notice] Apache/2.2.19 (Win32) configured -- resuming normal operations
[Sun May 22 22:10:09 2011] [notice] Server built: May 20 2011 17:39:35
[Sun May 22 22:10:09 2011] [notice] Parent: Created child process 2552
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 77.220.135.253 for ServerName
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 77.220.135.253 for ServerName
[Sun May 22 22:10:09 2011] [notice] Child 2552: Child process is running
[Sun May 22 22:10:09 2011] [notice] Child 2552: Acquired the start mutex.
[Sun May 22 22:10:09 2011] [notice] Child 2552: Starting 64 worker threads.
[Sun May 22 22:10:09 2011] [notice] Child 2552: Starting thread to listen on port 80.
[Sun May 22 22:20:09 2011] [notice] Parent: Received restart signal -- Restarting the server.
[Sun May 22 22:20:09 2011] [notice] Child 2552: Exit event signaled. Child process is ending.
httpd.exe: Syntax error on line 229 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: </Directory> without matching <Directory> section
[Sun May 22 22:20:09 2011] [warn] (OS 995)Операция ввода/вывода была прервана из-за завершения потока команд или по запросу приложения.  : winnt_accept: Asynchronous AcceptEx failed.
[Sun May 22 22:20:10 2011] [notice] Child 2552: Released the start mutex
[Sun May 22 22:20:11 2011] [notice] Child 2552: All worker threads have exited.
[Sun May 22 22:20:11 2011] [notice] Child 2552: Child process is exiting

267

Re: phpMyAdmin - Ошибка

Обратите внимание на строку:
Syntax error on line 229 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: </Directory> without matching <Directory> section

Закрывающий тег </Directory> на 229 строке не имеет парного открывающего тега.

268

Re: phpMyAdmin - Ошибка

Вы знаете, я в этом деле новичок, посмотрите пожалуйста, что у меня здесь не правильно.

LoadModule rewrite_module modules/mod_rewrite.so
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module "C:/php/php5apache2_2.dll"
PHPIniDir "C:/php"
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin webmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/apache"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options Includes Indexes FollowSymLinks
    AllowOverride All
    Allow from all
 </Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #

    #
    # Controls who can get stuff from this server.
    #

#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm index.shtml index.php
 </IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "C:/apache/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "C:/apache/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

269

Re: phpMyAdmin - Ошибка

djbald сказал:

посмотрите пожалуйста, что у меня здесь не правильно.

Не вижу ошибок. При запуске Apache выходит какая-то ошибка? Если да, то посмотрите ее в error.log.

270

Re: phpMyAdmin - Ошибка

Выдаёт  ошибку
Ошибка

Ответ MySQL: Документация
Соединение невозможно! Неверные настройки.

phpMyAdmin не смог установить соединение с сервером MySQL. Проверьте хост, имя пользователя и пароль установленные в конфигурационном файле config.inc.php и удостоверьтесь, что они соответствуют данным полученным от администратора сервера MySQL.

Содержимое config.inc.php :
  $i = 0;
  $i++;
  $cfg['Servers'][$i]['host'] = 'localhost';
  $cfg['Servers'][$i]['user'] = 'root';
  $cfg['Servers'][$i]['password'] = ''; /* Пароль пользователя root*/
  $cfg['Servers'][$i]['extension'] = 'mysqli';
  $cfg['Servers'][$i]['connect_type'] = 'tcp';
  $cfg['Servers'][$i]['compress'] = false;
  $cfg['Servers'][$i]['auth_type'] = 'config';
  $cfg['Servers'][$i]['nopassword']= true;

При запуске скрипта, с запросом к бд, из каталога куда распакован phpmyadmin, всё работает, то есть оператор SELECT возвращает содержимое таблицы.
При обращении к MySQL через консоль тоже всё работает:
>mysql -uroot -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 1 to server version: 5.0.9-beta-nt

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

mysql>

В чём дело? Почему так происходит??

271

Re: phpMyAdmin - Ошибка

Если пароль у root пустой, попробуйте в конфигурационный файл phpMyAdmin (config.inc.php) добавить строку:

$cfg['Servers'][$i]['AllowNoPassword'] = true;

272

Re: phpMyAdmin - Ошибка

Здравствуйте! Переустанавливал все ...цать раз - и VC6 и VC9 версии,и в разные директории тоже пробовал (весь комплекс), каждый раз руководствуясь инструкциями на http://php-myadmin.ru/learning/instrument-intro.html . И все время при тестировании с помощью index.php обнаруживается подобное тому,что имею сейчас:
   Configuration File (php.ini) Path                    C:\Windows
   Loaded Configuration File                    (none)
   Scan this dir for additional .ini files      (none)
   Additional .ini files parsed                    (none)
хотя всё хозяйство стоит в другой директории,но при редактировании настроек это обстоятельство учтено. Соответственно при попытке войти в  http://localhost/phpmyadmin/  пишет:

273 (изменено: nomad87, 2011-06-18 15:21:30)

Re: phpMyAdmin - Ошибка

phpMyAdmin - Error

Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly.

Кроме этого сверху видно содержимое файла config.inc.php. Помогите разобраться,пожалуйста!

274 (изменено: nomad87, 2011-06-18 14:07:47)

Re: phpMyAdmin - Ошибка

Извините,забыл -
httpd-2.2.19-win32-x86-ssl.zip взят с  https://www.apachelounge.com/download/,
VC9 x86 Thread Safe Zip (2011-Mar-22 13:27:32) с http://windows.php.net/download/,
phpMyAdmin-3.4.2-all-languages.zip с http://phpmyadmin.net/home_page/downloads.php,
MySQL Community Server 5.5.13 Windows (x86, 32-bit), MSI Installer с http://www.mysql.com/downloads/mysql/
Windows 7 ultimate sp1

275

Re: phpMyAdmin - Ошибка

nomad87 сказал:

Loaded Configuration File                    (none)

Причина проблем в том, что не загружен конфигурационный файл PHP.

1) Убедитесь, что в PATH прописан путь к корню PHP. После внесения изменений в PATH, перезагрузите компьютер.
2) Убедитесь, что в httpd.conf есть строки:

LoadModule php5_module "C:/php/php5apache2_2.dll"
PHPIniDir "C:/php"